YOU MUST LOG IN OR CREATE ACCOUNT TO SEE WHOLESALE PRICES
Dual 6W series
Tue, 12/08/2009 - 9:27pm | 
Jimmyb
Dual 6W series
Model: Dual 6W 6.8-30 volts
The Pro-Tech, Dual 6W data line surge suppressor incorporates state-of-the-art technology and provides multi-stage hybrid protection for your equipment connected For the data side.
Specify 6.8 Volts DC, 15 Volts DC, 30 Volts DC depending on your system, 4W for four wire and 6W for six wire. These units are designed to protect the Mother Board/Computer Board, and the Card Reader.
The Pro-Tech, Dual 6W data line surge suppressor incorporates state-of-the-art technology and provides multi-stage hybrid protection for your equipment connected to your data lines. Tested to ANSI/IEEE B3 Impulse Standards that exceed normal UL 497B testing standards, this unit exceeds industrial grade surge protection without loading your sensitive data lines and is self restoring after each surge within ratings.
|
Specifications – Operating: |
|
|
|
|
|
Maximum Operating Voltage: |
5V DC, 12V DC, or 24V DC |
|
Typical Leakage Current: |
<5u Amps |
|
Maximum Data Rate: |
10Mhz |
|
Operation Temperature: |
-40 to +85 C |
|
Connectors: |
Dual Terminal Blocks |
|
Lines Protected: |
6 Lines (3 Pair) |
|
Dimensions: |
Length: 3” Width: 2” Height: 1 1/2 ” |
|
|
|
|
Specifications – Electronic: |
|
|
|
|
|
Maximum Surge Current (8x20us): |
3,000 Amps |
|
Maximum Surge Voltage (1.2x50us): |
6,000 Volts |
|
Capacitance: |
<250 pf |
|
Clamping Voltage: |
6.8V DC, 15V DC, and 30V DC |
|
Clamping Response Time: |
<5 Nanoseconds |
|
Voltage Sensitive: |
Non-Load Bearing |
|
Pass Voltage Tested to ANSI/IEEE B3: |
<10V DC, 19V DC and 31V DC |
|
Power Dissipation (8x20us): |
1st. Stage: 3,000 Amps per line 2nd Stage: Filter Section 3rd Stage: 100,000 VA |
You must specify voltage required when ordering this unit
Login or register to post comments | 
Tags: Access Control, Computer Systems, Fire Systems, Telephone Systems