YOU MUST LOG IN OR CREATE ACCOUNT TO SEE WHOLESALE PRICES
Isolated Loop Circuit Protectors Series Models:
Fri, 12/18/2009 - 12:56am | 
Jimmyb
ILCP Series Models: UL listed 497-FORTH EDITION---This price is Retail PLEASE LOG IN to view wholesale prices.
ILCP Series Models: 15, 30, 60, 200 Volt. These are UL listed 497 forth edition, in-line series screw terminal multi-stage hybrid devices. These units are designed not only to protect equipment but also reduce the incidence of false alarms due to its close clamping ability at high-induced voltages. There is a ground lug provided. Only use if you have a common ground i.e. single ground for entire system to prevent ground loops. Click on Picture to Enlarge
ILCP15: 15 to 200 Volts DC to be used on the initiating circuits and addressable loops operating at 15V DC that are drawing less than 1 amp.* For notification appliance circuits that draw up to 3 amps add BH after the part number.( See options below )
|
Specifications – Operating: |
|
|
|
|
|
Maximum Operating Voltage: |
15 Volts DC - 200 Volt |
|
Typical Leakage Current: |
< 5u Amps |
|
Maximum Data Rate: |
22 Kbs |
|
Operation Temperature: |
- 40 - + 85 C |
|
Connection: |
Dual Terminal Blocks |
|
Lines Protected: |
One Pair |
|
Installation Configuration: |
In-Line Series |
|
|
|
|
Specifications – Electronic: |
|
|
|
|
|
Voltage Breakdown |
100/us (VDC) are all <1000 |
|
Voltage Breakdown |
100V/s (VDC) as Listed |
|
Capacitance: |
<250 pf |
|
Clamping Voltage: |
15 Volts / 30 Volts / 60Volt / 200 Volt |
|
Clamping Response Time: |
<5 Nanoseconds |
|
Voltage: |
Voltage sensitive |
|
Power Dissipation: |
60,000,000 VA |
|
UL497 |
E 331867 |
|
Pass Voltage (ANSI/IEEE B3 Impulse): |
19 Volts Peak |
|
First Stage Power Dissipation (8x20us): |
10,000 Amps |
|
Dimension: |
Depth: 1” Width: 2” Length: 1 ½” Tabs: ½” each |
